Sustainable Technology
Given that microplastic pollution is ubiquitous in soil, oceans, and even human bodies, it has grown to be a serious environmental concern. This issue is greatly exacerbated by microplastic powders, which are frequently used in cosmetics due to their smooth texture and exfoliating qualities.
Deep sea pressures ( minimum 27 bar or 270 m deep ) were utilized to produce fresh ( not salty ) water bu using the existing membrane system .
We are currently in a race to find methods of storing energy that can be used for future electric vehicles and to store the massive amounts of renewable energy as we transition from a fossil fuel energy system to a clean, renewable energy system. Unfortunately,
Solar energy is the most widely available renewable energy. However, the challenge lies in capturing and converting large amounts of it into a usable form.
A furnace with a heat exchanger designed to have a pilot light size torch flame on 24 hours a day. The temperature doesn't fluctuate from hot to cold as a regular furnace. The temperature is virtually the same throughout the entire day. It uses less fuel and electricity,
Every once in a while, a revolutionary product comes along that changes everything.
Wildfires have become an increasingly destructive force, wreaking havoc on communities and natural landscapes worldwide. In response to this escalating crisis,
The constant loss of topsoil, ecological degradation, soil collapse, etc. are all effects of soil erosion, which can happen slowly or alarmingly. It is mainly caused due to Agri patterns, Grazing, Logging, and also due to lack of tree roots which firmly holds the soil together.
Desalinization, or desalination, is the process of removing salts and minerals from saline water to produce water suitable for human consumption or irrigation. There are two main types of modern desalination techniques: thermal (distillation) and membrane technologies. While desalination is more commonly associated with large-scale operations,
The known vertical-axis Darrieus rotors have a number of advantages over horizontal-axis turbines.
All the heaviest parts (generator, multiplier, brakes) are located below, on the surface of the earth.
There is no need to turn the turbine against the wind.
The S4 BACnet ecobee Integration enables whole building optimization by bringing ecobee Wi-Fi thermostats into the BACnet ecosystem for large, complex commercial buildings.
Page 8 of 9