2015
Entries
Multi-function PowerhouseTug & Barge (PTB) system is a novel design that utilizes electric propulsion in the barge and a tugboat with a set of generators as a power pack. The control will be onboard the PowerhouseTug.
This concept will have propulsion and operational advantage of a ship compounded with commercial advantage of a tug & barge system.
The Internet of Things (IoT) promises a world in which everything is connected by sensors to everything. The cost and logistics associated with installed wiring or using batteries to power these systems represent a significant cost. Our proprietary SemperCell technology,
Pre-assembled hermetic chip carrier for MMIC or ASIC or general purpose chips silicon base or quartz or other type electronic circuit chips.The advantage is that the chip carrier design is pre wired with lead wires pre bonded to the chip carrier itself that contact the pads of the chip itself when inserted.
Protocol #1: Glucose range oral indicator prescription formulary is a reduced disinfectant-elevated foam/froth levels in hydrogen peroxide additive dye color coded markers attaches molecules C6H1206 in saliva chemistry achieves synthesis purposeful for chemical reaction generates hydrogen peroxide-based saliva mixed glucose resulting in a foam/froth color a color pre-assigned a glucose value UV sensor-based indicator highlights
There are many adults and children who have died in car accidents. Also many are handicapped for life. Many improvements are present to prevent this occurring in small passenger cars. But when this car strike in high speed with any car/goods vehicle or a big tree then the passengers are either dead or injued.
* Our aim is to produce electric current using the magnetic repulsion force.
*The major disadvantage in electric car is ran out of electric charge in battery in few miles.
* To overcome this problem we need to charge the automotive battery in motion.
* Using the generator motor we are producing the electric current to charge the battery.
PROBLEM
Two common problems with turbocharging systems are noise and turbo lag. Closure, or partial closure, of the engine throttle while the turbo compressor is operating at high boost condition can causes excessive back pressure on the compressor creating a condition called surge. This pressure spike is damaging to the turbo bearings and compressor wheel and creates significant noise.
Known vehicle suspensions equipped with steel springs feature generally linear damping characteristic determined by a generally constant spring stiffness k = dF/dx, where F is force and x is suspension's flex. This spring stiffness k can be chosen to be optimal only for a fixed vehicle mass m.
Pyra is an advanced oven designed specifically for production on a 3D printer. Aside from the electronics and a few hardware components, Pyra is completely 3D printed. It combines the versatility of FDM technology with advanced cloud-based intelligence, defining the convergence of direct digital manufacturing and the Internet of Things.
Page 59 of 88