My design Expo RXC-1 is basically a flying car which can fly as well as can be driven on the road. I have designed this machinery specifically for Aerospace & Defense.

How does it work:

Motion of RXC:- The motion of RXC should be with two motors - one placed at the back and the other at the front side of the base.

Aeromotion of RXC: The motion of RXC should be with 4 motors each one placed at the diameter(center) of the hollow ring tyres with the propellers.
Tyre support from both at the back and at the front should be more than the length of the propeller.

Reason: if the length of the radius of the propeller and the distance between the main body and the tyre is less or equal to the length of the radius of the propellers then the RXC may damage the pilot, but if the distance between the propeller and the main body is more than the length of the radius of the propeller then it may be a very good machinery. The tyres are the most important par of it because the car will be in motion but no one would be able to see it.

Specifications
1. Flying car
2. Full solar system with recharging system
3. Full satelite connectivity
4. GPS tracker
5. Fully automated weaponary
6. Not visible to radar
7. Double tyre chain system