2012
Machinery & Equipment
This is my support system for retractable flat screen monitor room tables. Remember how disturbing the monitor on the table was during the meeting? My system includes a tubular support element (a rectangular development) which, on the one hand,
The FreeD is a hand-held, digitally controlled, milling device that is guided and monitored by a computer while still preserving the craftsperson's freedom to sculpt and carve. The computer will intervene only when the milling bit approaches the planned model.
The thermal stir welding process (U.S. Patents 7,980,449 & 8,127,977) is a new solid-state (meaning the weld metal does not melt during welding) welding process invented at NASA's Marshall Space Flight Center. The unique welding process (FIGURE 1) decouples the heating,
A major drawback with available thumbscrew type products is that sometimes not enough torque can be applied without a separate tool to clamp parts or engage a lock feature which is usually a requirement. The integral wrench greatly increases the torque applied to the screw.
This simple equipment is designed to improve efficiency and cost effectiveness level regarding time and material spent in tire manufacturing processes.
In current textile plies knitwork stage as initial process to make casing plies,
Universal spanner-screwdriver consists of
1) Frame (grey in picture).
2) 5 slotted (2 mm,3 mm,4 mm,5 mm,6 mm) screwdrivers.
3) 5 crossed (2 mm,3 mm,4 mm,5 mm,6 mm) screwdrivers.
4) Spanner (blue) (10 mm,12 mm,14 mm,19 mm,24 mm).
5) Spanner (red) (8 mm,11 mm,13 mm,17 mm,22 mm).
Analog to Digital Converters, ADC, provide digital representations of analog voltages/power for digital signal processing and control circuitry.
As sampling rates increase, problems of temperature drift, noise, aperture uncertainty and many more factors are exacerbated. Around 1978 a very bright Engineering Technician ( Bob ),
Thumb screws, wing nuts or knobs are usually hand tightened to secure parts that do not require large clamping forces. However, they are subject to undesirable loosening due to vibration.
There is a need for a more reliable hand tightened fastener that does not loosen.
Introduction
The vibratory cavitation piston pumps (VCPP) are intended for moving and spraying solutions and aggressive liquids.
It is remarkably that the VCPP technology was opened,
Project Overview:
This project will create an energy producing device that will take in an underwater current, increase its velocity 3 to 10 times. This gives the CKM an advantage over most designs today for current to power devices.
Page 9 of 10