MAXIMUM SYMMETRY POINT –PCST. https://lnkd.in/drFVhyNG ---

RESULTED QUADRATURE REQUIREMENT FOR THE QUANTIZED VALUE OF CIRCLE CIRCUMFERENCE TO DIAMETER RATIO: 4/ SQRT{[SQRT(5) +1]/2]} [ SHIFTED AND SPLITTED RED LINES FROM X-Y ORIGIN POINT (similarly GREEN lines corresponding to another value of perimeter to diameter ratio), IN CONTRAST WITH BLACK LINES. Lines correspond to circles-squares-triangles MAGNIFIED for a close up view: [For example of such an original [unmagnified] image], Ref: https://lnkd.in/d8b5Aunt MAXIMUM SYMMETRY – PCST POINT ON THE CIRCLE THE SQUARE THE TRIANGLE RED LINES FOR : π = 3.141592654.. BLACK LINES FOR : π = 3.14460551.. = ΠΣΧ https://lnkd.in/e6hPWQ5 https://lnkd.in/ehgspBw
© Copyright 1985 - 2025 Eur Ing Panagiotis Chr. Stefanides CEng MIET * Geometry Design and 2D Vectors’ Definition for Hand Drawings and AutoCad Computing Instructions by Panagiotis Stefanides [ Photos 1, 2, 3]. AutoCad Computing Performed by Dr. Giannis Kandilas [ Photo 3 A, B, C].

DESCRIPTION

A Tool is designed bearing the Characteristics of the Theory expressed by the Photos 1, 2, and 3, in the Text, to demonstrate an approach to the way the various values of [π ] were obtained diachronically.

A FLAT 3D plastic PRINT or metallic FLAT STRUCTURE, with the appropriate Relevant Sliding and Rotating metallic FIXTURES and a metallic ROD are envisaged with Dimensions according to demonstration Accuracy needs[ anticipate a 40x40x0,5 (cm) FORM AND DOUBLE lengths for the [detachable] DIRECTRICES and ROD, for a simple demonstration STRUCTURE] . 

A ROD, red in colour [ Photo 1], allowed to ROTATE [ clockwise or anticlockwise] about [ K], concurrently with in parallel with SLIDING [ upwards or downwards], in order to accomplish programmed tasks with respect to this configuration. Angle [ Tan(Θ) ] determines the value of [ π] obtained, but with a BROKEN SYMMETRY [according to the proposed theory presented on Photos 1,2 and 3].

NARRATIVE

MAXIMUM SYMMETRY POINT –PCST . https://lnkd.in/drFVhyNG ---

RESULTED QUADRATURE REQUIREMENT FOR THE QUANTIZED VALUE OF CIRCLE CIRCUMFERENCE TO DIAMETER RATIO: 4/ SQRT{[SQRT(5) +1]/2]} [ SHIFTED AND SPLITTED RED LINES FROM X-Y ORIGIN POINT (similarly GREEN lines corresponding to another value of perimeter to diameter ratio ), IN CONTRAST WITH BLACK LINES. Lines correspond to circles-squares-triangles MAGNIFIED for a close up view: [For example of such an original [unmagnified] image] , Ref: https://lnkd.in/d8b5Aunt MAXIMUM SYMMETRY – PCST POINT ON THE CIRCLE THE SQUARE THE TRIANGLE RED LINES FOR : π = 3.141592654.. BLACK LINES FOR : π = 3.14460551.. = ΠΣΧ https://lnkd.in/e6hPWQ5 https://lnkd.in/ehgspBw

© Copyright 1985 - 2025 Eur Ing Panagiotis Chr. Stefanides CEng MIET
* Geometry Design and 2D Vectors’ Definition for Hand Drawings and AutoCad Computing Instructions by Panagiotis Stefanides [ Photos 1, 2, 3]. AutoCad Computing Performed by Dr. Giannis Kandilas [ Photo 3 A, B, C].
http://www.stefanides.gr
This email address is being protected from spambots. You need JavaScript enabled to view it.