2023
Automotive/Transportation
Laminated electrical steel core is an indispensable component of electric motors. It is required that the magnetic properties of the lamination core be optimum in all the directions of the sheet plane so that maximum efficiency and minimum energy losses can be achieved.
Since the introduction of water cooling to offroad performance motorcycles in 1981 [1], the most integral part of engine thermal management has remained unchanged. The traditional design of radiators uses winding louvers to exchange heat with the surrounding air in repeated zigzagging patterns (shown in Figure 1).
The OBD2 Simulator includes a handheld dongle and a remote terminal Graphic User Interface (GUI).
OBD2 Simulator can generate OBD2 signals for up to three Electronic Control Units (ECU): Engine, ABS, and Transmission. These signals are based on the SAE J1979 (classic OBD) and SAE J1979-2 (OBDonUDS) protocols.
This is a proposal for a future mandatory interface to support the testing of Connected and Automated Vehicles (CAVs), to be installed in all production vehicles, hence "On-Board Validation" or OBV. This would allow independent validation of CAVs by third parties,
The illustrated rock crawler axle is a simple mechanism that combines articulation and side shift to provide adjustable on-the-go variable caster and camber angles throughout the range of steering.
Rock crawling/bouncing introduces significant forces on the tires of a vehicle.
This innovation relates to the field of opposed piston internal combustion engines (OP-ICE) having two pistons in one cylinder configured to have facing heads. Specifically,
Motorcycle design is at a crossroads where electronic aids are presently being deployed not to enhance performance but to rectify the performance deficiencies present due to poor design, in particular that associated with telescopic forks.
TriboDyn® TRI-EX2 Motor Oils are a patented ceramic lubricant that is attracted to areas of heat & friction. As pressures increase with RPM or load, the special TRI-EX2 lubricants, combined with the active “Ceramic Coating Technology” in the oil,
On a 4-wheel drive vehicle, the force transmitted by each wheel depends on the soil characteristics and the wheel load. This last depends on the slope (Figure 1) and on the external forces (Figure 2) coming from a winch, a bucket for a work loader,
This automatic transmission is particularly developed to replace dual clutch transmissions which are pretty unreliable and expensive in general.
Page 5 of 8
Gold Sponsor
