2014
Entries
Summary
The formation of coal occurs over a long period of time after the debris on the bottom of temperate forests, and other forests that get a good amount of rainfall and level of organic debris.
A through study and review embracing observed reports of several national tragedies, where guns were unauthorized to be used to perform acts of mass murders or to attempt to avoid capture after some other heinous acts and current security methods for stored and active weapons.
Every year millions of people have to deal with damaged roads and potholes. The slow pace of repair work greatly hampers movement of people, goods and services and causes inconvenience to countless people. We intend to address the root cause of this problem,
PROJECT DESCRIPTION
OBJECTIVE:
The project aims at combining the designs of an earth mover as well as a robotic arm so as to provide flexibility in its working environment.
Contour Crafting (CC) is a computerized construction method that 3D Prints large-scale structures directly from architectural CAD models. Walls are built up by forming their outer surfaces via extrusion of a paste-like material, such as concrete,
This Rotary Engine consists of a cylindrical combustion chamber which contains 2 cross partitions in the form of X dividing the cylindrical chamber in 4 compartments. Extension of one partition serves as an output shaft and the other partition oscillates relative to the former while both rotating together.
A critical step in the purification process is the removal of excess solvent to provide a pure product for chemical analysis and subsequent use. The rotary evaporator is a basic tool for removing excess solvent.
Commercial CVT’s (Continuously Variable Transmission), in the automotive industry in existence currently (push belt CVT’s), are all based on a dynamic friction interface. The dynamic friction interface transmits the power through steel on steel interface in special traction fluid oil.
AIM: SAVE FUEL ENERGY (DIESEL,PETROL,CNG).
Page 61 of 82