Industrial conveying systems are used in many industries on production lines to convey many types of products such as cardboard boxes or plastic bottles. Typical conveyor systems consist of a moving chain or belt supported in a permanently mounted rigid frame with fixed guide rails to maintain product orientation as it flows down the conveyor. It is typically difficult and expensive to reconfigure a conveyor line layout once it has been assembled and installed. Until we invented the new Flex-Curve Conveyor it has been impossible to reconfigure a live operating conveyor line on the fly.
Our new Flex-Curve Conveyor Turn allows a conveyor turn to be easily reshaped into any angle between plus or minus 90 degrees. The Flex-Curve Turn can be swept through a full range of motion while conveying a product and the side guide rails automatically adjust their length maintaining a consistent width. Multiple Flex-Curve sections can be stacked to sweep thru any angle between plus and minus 180 degrees.
Our new Flex-Curve Conveyor allows for easy operator access through a conveyor line that previously required stairs and platforms to cross over.
Our new Flex-Curve Conveyor allows for an operating conveyor line to be re-routed to multiple down line operations without the need for cumbersome gates and additional permanent conveyors.
Our new Flex-Curve Conveyor allows a conveyor line to be easily customized and reshaped to allow it to be easily relocated and used on multiple production lines or easily reconfigured for future applications.
Video
-
Awards
- 2012 Top 100 Entries
Voting
-
ABOUT THE ENTRANT
- Name:Peter Yohe
- Type of entry:individual
- Software used for this entry:SolidWorks
- Patent status:pending