Centrifugal Separator Media.
This Device can be used on a vast scale for:
The separation and purification gases, liquids, powders;
Extraction of SO from exhausts of power-plants for prevention acid rains;
Extraction of toxic gases from chemical plant exhausts;
For separation from air O for medicine and metallurgy, N for medicine and aerosols, CO for beverage industry;
For refinery petroleum or removal it from water spills. It could be installed on commissioned submarines for reaching sank petroleum;
Desalting seawater;
Design for refinery petroleum on vast and mobile unit for small scale production;

For designing environmentally sound cool down equipment operative in wide range temperatures.
For refinery petroleum.

As for Freon coolers, they cause environmental problems including creating ozone holes. The suggesting design uses any homogeneous gas.

It’s comprising means [21] for moving media through a spiral pipe or cavity [9], offshoots [5 and 6], heat exchangers [24 and 25] for separated from homogeneous gas or liquid cold molecules for cool down surroundings and hot molecules for heating surroundings or removing heat from system or reservoirs for separated components of media.

It comprises means [21] for moving media through a spiral pipe or cavity [9], offshoots [5 and 6], reservoirs [34, 35 and 36] for collecting separated according their specific gravity media.
There is no design on market with compatible above stated features.
For refinery petroleum or removal it from water spills. It could be installed on commissioned submarines for reaching sank petroleum.

Researches in Russia revealed ~2.5 increased cost efficiency in getting car fuel with inferior version design this concept that requires 2 runs petroleum. More over manufacturing such design for refinery petroleum costs much less and requires much less area for compatible volume fuel production with thermal dissociation process. This design allows manufacture even mobile refinery units.

The design has huge global market potential due patentability and luck competition in most areas application.This design requires manufacturing spiral cavity with polished inner surface and costs much less then one available on the market if any.

The concept will secure a number other product improvements.